Pular para o conteúdo principal

Peças

Nenhum componente especificado.

  1. Flip over the turntable and remove the nine screws on the outer edges. Flip over the turntable and remove the nine screws on the outer edges.
    • Flip over the turntable and remove the nine screws on the outer edges.

  2. Remove the back cover by pulling it apart.
    • Remove the back cover by pulling it apart.

  3. Apple Watch Kits

    Screen and battery repairs just got easier.

    Comprar agora

    Apple Watch Kits

    Screen and battery repairs just got easier.

    Comprar agora
  4. Locate the largest circuit board inside the device.
    • Locate the largest circuit board inside the device.

  5. Locate the wires that are plugged into the side of the circuit board.
    • Locate the wires that are plugged into the side of the circuit board.

  6. Gently pull out the wires plugged into the circuit board. Gently pull out the wires plugged into the circuit board.
    • Gently pull out the wires plugged into the circuit board.

  7. Once the wires are unplugged you will notice two more wires plugged into the bottom of the circuit board. Note that these wires are soldered onto the circuit, indicated by the red markers.
    • Once the wires are unplugged you will notice two more wires plugged into the bottom of the circuit board.

    • Note that these wires are soldered onto the circuit, indicated by the red markers.

    • To completely remove the circuit board these wires must be removed.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Sukhjinder

Membro desde: 12-10-2011

11 reputação

Autoria de 1 guia

Equipe

Cal Poly, Team 17-14, Regan Fall 2011 Membro de Cal Poly, Team 17-14, Regan Fall 2011

CPSU-REGAN-F11S17G14

4 Membros

7 Guias de autoria

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 2

Todo: 1,120