Ir para o conteúdo principal

Disassembling Nokia X2-00

O que você precisa

  1. Disassembling Nokia X2-00, Nokia X2-00 Background Info: passo 1, imagem 1 %32
    • it's a cheap low-end Music Phone

    • mine got wet so i decided to clean it up and look inside!

  2. Disassembling Nokia X2-00, Removing the Battery: passo 2, imagem 1 %32 Disassembling Nokia X2-00, Removing the Battery: passo 2, imagem 2 %32 Disassembling Nokia X2-00, Removing the Battery: passo 2, imagem 3 %32
    • Flip it and pull the tab

    • the metal part should jump right off

    • after that remove the battery and sim card

  3. Disassembling Nokia X2-00, Diging In!: passo 3, imagem 1 %32
    • so i was kinda !#^&@@ off becouse there were no screws!

    • so i tryed to remove the screen protection, and it worked!

    • 1. i did break it

    • 2. there were no screws

    • just don't do that unless you need

  4. Disassembling Nokia X2-00, Diging In! 2nd attemp!: passo 4, imagem 1 %32 Disassembling Nokia X2-00, Diging In! 2nd attemp!: passo 4, imagem 2 %32
    • i tried to remove the side panels but that didn't work so i tried on top and it did work (Jimmy worked fine)

    • these clips kind of suck ....it takes lot of force to unclip these )

    • after you unclip it you get that piece

  5. Disassembling Nokia X2-00, Removing the midframe: passo 5, imagem 1 %32 Disassembling Nokia X2-00, Removing the midframe: passo 5, imagem 2 %32 Disassembling Nokia X2-00, Removing the midframe: passo 5, imagem 3 %32
    • remove these 2 TR6 Screws (mine were a bit blue)

    • open it up (clips on the bottom)

    • i was on Beast-Mode on these annying clips that held like gorilla

  6. Disassembling Nokia X2-00, Removing the display: passo 6, imagem 1 %32 Disassembling Nokia X2-00, Removing the display: passo 6, imagem 2 %32 Disassembling Nokia X2-00, Removing the display: passo 6, imagem 3 %32
    • Remove the 4 TR6 Screws

    • They are diffrent from the last ones !!! (this one on the right)

    • remove the whole PCB and remove the clips from the display and it should pop off

  7. Disassembling Nokia X2-00, The Display: passo 7, imagem 1 %32 Disassembling Nokia X2-00, The Display: passo 7, imagem 2 %32
    • it's TFT 2.2" 240x320 182 ppi Display

  8. Disassembling Nokia X2-00, The main PCB: passo 8, imagem 1 %32
    • anything shiehielded ...and non-replacable ...i don't like that one at all

    • sorry guys i have forgott to make photo of the backside :(

  9. Disassembling Nokia X2-00, Extra - Mastery pieces & Test: passo 9, imagem 1 %32 Disassembling Nokia X2-00, Extra - Mastery pieces & Test: passo 9, imagem 2 %32
    • extra steps that you don't need to do

    • 2 of those fell of and i have NO idea where from (and i don't even care)

    • i cleaned it up and powered it up and it works (just make sure you don't short anything)

  10. Disassembling Nokia X2-00, The END: passo 10, imagem 1 %32
    • i don't really like that one becouse it's hard to open and easy to crack plastics

    • but you can replace many things (not anything)

    • i would like USB on doughterboard and less shielding

Linha de Chegada

9 outras pessoas executaram este guia.

Mateusz

Membro desde: 10/20/14

1.498 Reputação

Autoria de 2 guias

Um comentário

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 15

Duração total: 5,013