Esta versão pode conter edições incorretas. Mude para o último instantâneo verificado.
O que você precisa
-
Este passo não foi traduzido. Ajude a traduzi-lo
-
Press down on the release latch on the bottom of the cover.
-
Once the latch is released, lift the cover from the phone.
-
-
-
Este passo não foi traduzido. Ajude a traduzi-lo
-
Unscrew the six screws with a Torx screwdriver (six-pointed star shaped bit).
-
-
Este passo não foi traduzido. Ajude a traduzi-lo
-
Insert a flat screwdriver between the black body and plastic layer.
-
-
Este passo não foi traduzido. Ajude a traduzi-lo
-
Pry the layers apart. The LCD and plastic layer will lift out as one piece.
-
-
Este passo não foi traduzido. Ajude a traduzi-lo
-
With the screws removed, the logic board can then be lifted out of the body by hand.
-