Introdução

This guide details how to remove the internal backplate to expose the speaker, the headphone jack, and the logic board.

  1. Slide the notch downward while pulling the back cover off to remove it.
    • Slide the notch downward while pulling the back cover off to remove it.

    Adicionar comentário

  2. Use your fingers to push the battery upward from the bottom.
    • Use your fingers to push the battery upward from the bottom.

    • Lift upwards to remove the battery.

    Adicionar comentário

    • Unscrew the antenna in a counter-clockwise fashion.

    • Remove the aluminum cover.

    Adicionar comentário

    • Unscrew the 3 screws shown.

    • Lift up the right part of the Nextel logo and unscrew the screw underneath.

    Adicionar comentário

    • DO NOT force the cover off as it could damage the ribbon cable!

    • Gently lift the back cover off.

    Adicionar comentário

    • Carefully pry off the connection between the headphone jack and logic board.

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Grant Glazebrook

Member since: 14-04-2010

7 reputação

2 Guides authored

Equipe

Cal Poly, Team 29-61, Johann Spring 2010 Membro de Cal Poly, Team 29-61, Johann Spring 2010

CPSU-JOHANN-S10S29G61

4 Membros

6 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Todo: 1,241