Conserte seus objetos Comunidade Loja

Motorola V180 Connector Ribbon Replacement

Introdução

Disassembling top half to get to connector ribbon, inside screen, and speaker, make sure to approach the next few steps with precision and caution. In the device a ribbon plays a crucial role for the device's function ability and requires careful disassembly of the phone's components.

O que você precisa

  1. Motorola V180 Connector Ribbon Replacement, Connector Ribbon: passo 1, imagem 1 %32

    • Gently tug on the upper edge of the faceplate, and it will easily detach.

    Editar

  2. Motorola V180 Connector Ribbon Replacement: passo 2, imagem 1 %32

    • Remove the four screws securing the front cover.

    Editar

  3. Motorola V180 Connector Ribbon Replacement: passo 3, imagem 1 %32

    • Gently glide the metallic silver cover outward.

    • This piece is wedged in tight. Try to slide out one hook at a time, instead of both simultaneously.

    Editar

  4. Motorola V180 Connector Ribbon Replacement: passo 4, imagem 1 %32

    • Insert a pair of tweezers between the silver and black sections of the cover.

    • The silver section should now easily snap away.

    Editar

  5. Motorola V180 Connector Ribbon Replacement: passo 5, imagem 1 %32

    • The black rubber component can now easily be taken off.

    Editar

  6. Motorola V180 Connector Ribbon Replacement: passo 6, imagem 1 %32

    • Use a soldering iron to detach the connector ribbon from the phone.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 7 outros contribuidores

Tyler Knisley

Membro desde: 05/07/10

1 Reputação

Autoria de 7 guias

Emblemas: 4

+1 outro emblema

Equipe

Cal Poly, Team 6-16, Maness Spring 2010 Membro de Cal Poly, Team 6-16, Maness Spring 2010

CPSU-MANESS-S10S6G16

Membros da 4

Autoria de 13 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 2

Duração total: 2,613