Ir para o conteúdo principal

Introdução

After the batteries are removed the case can be disassembled.

Peças

Nenhum componente especificado.

  1. First, apply pressure with your thumb on the top of the battery cover.
    • First, apply pressure with your thumb on the top of the battery cover.

  2. Next, pull down on the cover until it begins to slide.
    • Next, pull down on the cover until it begins to slide.

  3. Finally, once the cover is completely off, pry up the old batteries with your finger or a strong, skinny tool (i.e. spudger).
    • Finally, once the cover is completely off, pry up the old batteries with your finger or a strong, skinny tool (i.e. spudger).

  4. Unscrew the six 8.0 millimeter long, #0 screws on the backside of the case using the Phillips #0 screwdriver.
    • Unscrew the six 8.0 millimeter long, #0 screws on the backside of the case using the Phillips #0 screwdriver.

  5. Detach back part of the case by gently lifting up.
    • Detach back part of the case by gently lifting up.

Conclusão

To reassemble your device, follow these instructions in reverse order.

3 outras pessoas concluíram este guia.

Team

Cal Poly, Team 19-43, Regan Winter 2013 Membro de Cal Poly, Team 19-43, Regan Winter 2013

CPSU-REGAN-W13S19G43

3 Membros

9 Guias de autoria

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 3

Past 30 Days: 10

All Time: 1,361