Introdução

After the batteries are removed the case can be disassembled.

Peças

Não são necessárias peças.

First, apply pressure with your thumb on the top of the battery cover.
  • First, apply pressure with your thumb on the top of the battery cover.

Adicionar comentário

Next, pull down on the cover until it begins to slide.
  • Next, pull down on the cover until it begins to slide.

Adicionar comentário

  • Finally, once the cover is completely off, pry up the old batteries with your finger or a strong, skinny tool (i.e. spudger).

Adicionar comentário

  • Unscrew the six 8.0 millimeter long, #0 screws on the backside of the case using the Phillips #0 screwdriver.

Adicionar comentário

  • Detach back part of the case by gently lifting up.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

3 outras pessoas concluíram este guia.

James Tucker Dunn

Member since: 18-01-2013

371 reputação

6 Guides authored

Equipe

Cal Poly, Team 19-43, Regan Winter 2013 Membro de Cal Poly, Team 19-43, Regan Winter 2013

CPSU-REGAN-W13S19G43

3 Membros

9 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 12

Todo: 1,187