Introdução

There are a lot of items behind the dash board of a W123 that may eventually need service, anything from various relays, to one of several vacuum actuators for the climate control vents and flaps.

One way to get easier access to several of these parts is to remove the glove box liner. Learn how here.

Peças

Não são necessárias peças.

  1. Start by opening the glove box.
    • Start by opening the glove box.

    Adicionar comentário

  2. Remove the two phillips screws in the glove box door catch, then remove it.
    • Remove the two phillips screws in the glove box door catch, then remove it.

    Adicionar comentário

    • Gently pry apart the expansion plug in the glove box clips. There will be a row of them on top, and on the bottom.

    • Once you've pried it out part of the way you can pull it the rest of the way out by hand, or gently with needle nose pliers.

    Adicionar comentário

  3. GIVE TOOLS. FIX FOREVER.

    GIVE TOOLS.

    FIX FOREVER.

    Spread the Fixmas cheer.

    GIVE TOOLS. FIX FOREVER.

    Spread the Fixmas cheer.

    • You can then pry the clips out of the liner. Remove them all.

    Adicionar comentário

    • Gently pry down the cover for the glove box lamp.

    Adicionar comentário

    • Now unplug the two connections from the lamp and remove the lamp housing.

    • Be sure to make note of the orientation of the two wires for re-installation.

    Adicionar comentário

    • Now the glove box liner will pull out by hand.

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas concluíram este guia.

Nicolas Siemsen

Member since: 06-12-2013

29.454 reputação

79 Guides authored

Equipe

Master Techs Membro de Master Techs

Community

279 Membros

758 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 5

Últimos 7 dias: 23

Últimos 30 dias: 68

Todo: 5,785