Pular para o conteúdo principal

Peças

Nenhum componente especificado.

  1. First be sure to turn the power switch to the off position.
    • First be sure to turn the power switch to the off position.

    • Do this by turning the leftmost knob counter-clockwise as until the line points to "off."

  2. Now remove the battery. On the back of the device locate the battery cover. Remove it by pushing down on the clip.
    • Now remove the battery.

    • On the back of the device locate the battery cover.

    • Remove it by pushing down on the clip.

    • Then pull the piece of fabric until the battery comes out.

  3. Use the long, skinny phillips head screwdriver to remove the 4 7/16" screws on the back of the device in the four corners. Once unscrewed, do not try to take each screw out. Move to next step once all screwed have been unscrewed.
    • Use the long, skinny phillips head screwdriver to remove the 4 7/16" screws on the back of the device in the four corners.

    • Once unscrewed, do not try to take each screw out. Move to next step once all screwed have been unscrewed.

  4. Kit de Reparo de Bateria do MacBook

    A partir de $69.99

    Buy Now

    Kit de Reparo de Bateria do MacBook

    A partir de $69.99

    Buy Now
  5. Now pull the back panel off and place it down as shown. Pull the panel straight up so you do not lose the screws.
    • Now pull the back panel off and place it down as shown. Pull the panel straight up so you do not lose the screws.

  6. Use a 9/16" socket to remove the nut around the headphone jack. Be careful to not lose the washer. Use a 9/16" socket to remove the nut around the headphone jack. Be careful to not lose the washer.
    • Use a 9/16" socket to remove the nut around the headphone jack. Be careful to not lose the washer.

  7. Remove the 7/16" phillips head screw.
    • Remove the 7/16" phillips head screw.

  8. Grab the headphone jack from inside the case and pull it toward the speaker until you can fully remove it from the device.
    • Grab the headphone jack from inside the case and pull it toward the speaker until you can fully remove it from the device.

Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas concluíram este guia.

MacKinley

Membro desde: 22-10-2013

675 reputação

5 Guias de autoria

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 3

Últimos 30 dias: 7

Todo: 1,127