Conserte seus objetos Comunidade Loja

Este guia tem alterações mais recentes. Mudar para a última versão não verificada.

Disassembling Kodak Easyshare C813 Back Cover

Introdução

This tutorial demonstrates how to remove the back cover from the camera

O que você precisa

  1. Disassembling Kodak Easyshare C813 Back Cover, Battery: passo 1, imagem 1 %32

    • Turn off camera by firmly pressing the power button that is located on the top of the camera near the selector dial.

    Editar

  2. Disassembling Kodak Easyshare C813 Back Cover: passo 2, imagem 1 %32 Disassembling Kodak Easyshare C813 Back Cover: passo 2, imagem 2 %32 Disassembling Kodak Easyshare C813 Back Cover: passo 2, imagem 3 %32

    • Press thumb firmly on battery door and slide it in the direction of the arrow.

    • Lift thumb allowing the door to swing open.

    Editar

  3. Disassembling Kodak Easyshare C813 Back Cover, Back Cover: passo 3, imagem 1 %32

    • Before removing back cover, it is advisable to use an anti-static wrist strap to prevent damage to electronics.

    Editar

  5. Disassembling Kodak Easyshare C813 Back Cover: passo 4, imagem 1 %32

    • Turn the camera off by firmly pressing the power button located on top of the camera.

    Editar

  6. Disassembling Kodak Easyshare C813 Back Cover: passo 5, imagem 1 %32 Disassembling Kodak Easyshare C813 Back Cover: passo 5, imagem 2 %32 Disassembling Kodak Easyshare C813 Back Cover: passo 5, imagem 3 %32

    • Locate the 7 screws holding the back cover on.

    • Three screws are located on the bottom of the camera.

    • Two screws are located on the side shown in the photograph.

    • Two final screws are located on the opposite side shown in the photograph.

    Editar

  7. Disassembling Kodak Easyshare C813 Back Cover: passo 6, imagem 1 %32 Disassembling Kodak Easyshare C813 Back Cover: passo 6, imagem 2 %32 Disassembling Kodak Easyshare C813 Back Cover: passo 6, imagem 3 %32
    Ferramenta utilizada nesse passo:
    Phillips #00 Screwdriver
    $5.49
    Comprar

    • Remove all 7 screws:

    • Hold the camera firmly with one hand so that you can still see a screw.

    • Place the Philips 00(Found here)screwdriver into the screw.

    • Turn the screwdriver to the left until it is free.

    • Repeat for the remaining screws.

    Editar

  8. Disassembling Kodak Easyshare C813 Back Cover: passo 7, imagem 1 %32 Disassembling Kodak Easyshare C813 Back Cover: passo 7, imagem 2 %32 Disassembling Kodak Easyshare C813 Back Cover: passo 7, imagem 3 %32

    • Use plastic opening tools to slightly open the side of the case.

    • Insert a plastic opening tool and apply pressure to the internal three tabs at the top.

    • The first two are near the words "3X Optical Zoom".

    • The third is near the shutter button.

    Editar

  9. Disassembling Kodak Easyshare C813 Back Cover: passo 8, imagem 1 %32 Disassembling Kodak Easyshare C813 Back Cover: passo 8, imagem 2 %32 Disassembling Kodak Easyshare C813 Back Cover: passo 8, imagem 3 %32

    • Gently pull apart the back cover from the rest of the camera.

    • Make sure there are no more screws or tabs keeping the cover on.

    • Use the plastic opening tool to separate any sides still closely connected.

    Editar
Linha de Chegada

Uma outra pessoa concluiu este guia.

Autor(a)

com 7 outros contribuidores

Susan Marano

Membro desde: 04/15/10

336 Reputação

Autoria de 7 guias

Emblemas: 16

+13 outros emblemas

Equipe

Cal Poly, Team 24-22, Regan Spring 2010 Membro de Cal Poly, Team 24-22, Regan Spring 2010

CPSU-REGAN-S10S24G22

Membros da 4

Autoria de 20 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 2

Duração total: 2,363