Esta versão pode conter edições incorretas. Mude para o último instantâneo verificado.
O que você precisa
-
Este passo não foi traduzido. Ajude a traduzi-lo
-
Using a Phillips #0 screwdriver, identify and unscrew the twenty screws located on the underside of the T42.
-
-
Este passo não foi traduzido. Ajude a traduzi-lo
-
Unscrew the four Phillips screws located on either side of the rear of the T42 (there are two located on each end.)
-
Cancelar: não concluí este guia.
Uma outra pessoa concluiu este guia.