Pular para o conteúdo principal

Introdução

In order to gain access to most of the internal components the top (or lid) of the printer must be removed. This guide is intended as a prerequisite for other installations.

Peças

Nenhum componente especificado.

  1. Open the front access panel by placing your finger in the front slot and pulling gently.
    • Open the front access panel by placing your finger in the front slot and pulling gently.

  2. Open the protective lid that is covering the glass. Press gently against the base of the panel to remove the lid from the rest of the printer.
    • Open the protective lid that is covering the glass. Press gently against the base of the panel to remove the lid from the rest of the printer.

  3. Apple Watch Kits

    Screen and battery repairs just got easier.

    Comprar agora

    Apple Watch Kits

    Screen and battery repairs just got easier.

    Comprar agora
  4. Remove the four 9mm T10 Torx screws on the top. Remove the four 9mm T10 Torx screws on the top. Remove the four 9mm T10 Torx screws on the top.
    • Remove the four 9mm T10 Torx screws on the top.

  5. Carefully lift the top panel off of the printer. Do not tear or damage the two cables that connect the top lid to the motherboard.
    • Carefully lift the top panel off of the printer.

    • Do not tear or damage the two cables that connect the top lid to the motherboard.

  6. Remove the two cables by gripping each one close to their connection ports on the motherboard and gently disconnecting them. Remove the two cables by gripping each one close to their connection ports on the motherboard and gently disconnecting them. Remove the two cables by gripping each one close to their connection ports on the motherboard and gently disconnecting them.
    • Remove the two cables by gripping each one close to their connection ports on the motherboard and gently disconnecting them.

Conclusão

To reassemble your device, follow these instructions in reverse order.

18 outras pessoas concluíram este guia.

Tim

Membro desde: 15-01-2013

166 reputação

4 Guias de autoria

Equipe

Cal Poly, Team 18-35, Regan Winter 2013 Membro de Cal Poly, Team 18-35, Regan Winter 2013

CPSU-REGAN-W13S18G35

5 Membros

8 Guias de autoria

I want fix my HP DESKJET F448o, My problem is, that the scanner arm is block.

When I turn on, the scanner arm is block, how can fix its?

mbeto0351 - Responder

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 10

Últimos 30 dias: 58

Todo: 7,240