Introdução

This guide will show you how to remove the hard drive from your HP Compaq dx2000MT

Turn off your computer and remove the power cable by pulling it straight out of its socket.
  • Turn off your computer and remove the power cable by pulling it straight out of its socket.

Adicionar comentário

Remove the 2 Phillips #2 screws that secure the case door to the device. Remove the 2 Phillips #2 screws that secure the case door to the device.
  • Remove the 2 Phillips #2 screws that secure the case door to the device.

Adicionar comentário

Remove the side case door by pushing towards the rear of the device with your hand. This may take considerable force so keep pushing! Once you slide the door back, remove it by pulling it outwards from the device.
  • Remove the side case door by pushing towards the rear of the device with your hand.

    • This may take considerable force so keep pushing!

  • Once you slide the door back, remove it by pulling it outwards from the device.

Adicionar comentário

Remove the side case door by pushing towards the rear of the device with your hand. Once again, this may take considerable force. Once you slide the door back, remove it by pulling it outwards from the device.
  • Remove the side case door by pushing towards the rear of the device with your hand.

    • Once again, this may take considerable force.

  • Once you slide the door back, remove it by pulling it outwards from the device.

Adicionar comentário

Remove the IDE data and power cables from the hard drive Remove the IDE data and power cables from the hard drive Remove the IDE data and power cables from the hard drive
  • Remove the IDE data and power cables from the hard drive

Adicionar comentário

Remove the front bezel by pulling upwards and out from below the lowest air vent. Remove the front bezel by pulling upwards and out from below the lowest air vent. Remove the front bezel by pulling upwards and out from below the lowest air vent.
  • Remove the front bezel by pulling upwards and out from below the lowest air vent.

Adicionar comentário

Remove the external drive faceplate by removing the 2 Torx T15 Screws Remove the external drive faceplate by removing the 2 Torx T15 Screws Remove the external drive faceplate by removing the 2 Torx T15 Screws
  • Remove the external drive faceplate by removing the 2 Torx T15 Screws

Adicionar comentário

Remove the following screws: Front Torx T15.
  • Remove the following screws:

    • Front Torx T15.

    • Torx T15 mounting the hard drive cage to the optical drive bay.

Adicionar comentário

Fully remove the hard drive cage by sliding it towards the back of the device and pulling down. Fully remove the hard drive cage by sliding it towards the back of the device and pulling down. Fully remove the hard drive cage by sliding it towards the back of the device and pulling down.
  • Fully remove the hard drive cage by sliding it towards the back of the device and pulling down.

Adicionar comentário

Remove 2 Torx T15 screws holding this side of the hard drive in place Remove 2 Torx T15 screws holding this side of the hard drive in place Remove 2 Torx T15 screws holding this side of the hard drive in place
  • Remove 2 Torx T15 screws holding this side of the hard drive in place

Adicionar comentário

Proceed to the other side of the hard drive cage Remove 2 Torx T15 screws holding this side of the hard drive in place Remove 2 Torx T15 screws holding this side of the hard drive in place
  • Proceed to the other side of the hard drive cage

  • Remove 2 Torx T15 screws holding this side of the hard drive in place

Adicionar comentário

Remove the hard drive from the hard drive cage by pulling it outward from the cage Remove the hard drive from the hard drive cage by pulling it outward from the cage
  • Remove the hard drive from the hard drive cage by pulling it outward from the cage

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

3 outras pessoas concluíram este guia.

Eva Pong

Member since: 22-09-2011

101 reputação

2 Guides authored

Equipe

Cal Poly, Team 17-16, Regan Fall 2011 Membro de Cal Poly, Team 17-16, Regan Fall 2011

CPSU-REGAN-F11S17G16

4 Membros

17 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 3

Últimos 30 dias: 25

Todo: 5,198