Conserte seus objetos Comunidade Loja

Griffin iFM 4027 Right Side Panel Replacement

Introdução

A side panel is located on each side of the device. The right side panel, containing the button(s), controls the track being selected as well as the volume of the device. There are no prerequisites required for this guide.

  • A plastic pry bar is necessary to remove the panel.

O que você precisa

  1. Griffin iFM 4027 Right Side Panel Replacement, Right Side Panel: passo 1, imagem 1 %32
    Ferramenta utilizada nesse passo:
    iFixit Opening Tool
    $1.99
    Comprar

    • First, lodge the tip of the plastic iFixit opening tool into the top corner of the device.

    • Apply pressure upward with the iFixit Opening Tool. This should release the two panels away from each other.

    Editar

  3. Griffin iFM 4027 Right Side Panel Replacement: passo 2, imagem 1 %32 Griffin iFM 4027 Right Side Panel Replacement: passo 2, imagem 2 %32 Griffin iFM 4027 Right Side Panel Replacement: passo 2, imagem 3 %32

    • Use your fingers to separate the right side panel from the device.

    • Turn the panel over so that the outer edge is facing downward.

    • Use your fingers to dislodge the buttons, and then set them aside for later.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 9 outros contribuidores

Alexander

Membro desde: 03/09/12

101 Reputação

Autoria de 6 guias

Emblemas: 7

+4 outros emblemas

Equipe

Clemson, Team 15-3, Benson Spring 2012 Membro de Clemson, Team 15-3, Benson Spring 2012

CLEM-BENSON-S12S15G3

Membros da 3

Autoria de 6 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 940