Introdução

Use this guide to remove the shell of the handset

Peças

Não são necessárias peças.

Unplug the device before proceeding. Remove the phone cord from the phone jack from the base of the headset.
  • Unplug the device before proceeding.

  • Remove the phone cord from the phone jack from the base of the headset.

    • Use a plastic opening tool to remove the phone cord.

Adicionar comentário

Remove the phone cord screw cap. Unscrew the 7.5mm screw. Remove the screw cap.
  • Remove the phone cord screw cap.

    • Unscrew the 7.5mm screw.

    • Remove the screw cap.

  • Remove the cord from the phone base.

Adicionar comentário

Remove the plastic cover with a Plastic Opening Tool by gently sliding the tool underneath the plastic and pry the cover off. Remove the plastic cover with a Plastic Opening Tool by gently sliding the tool underneath the plastic and pry the cover off.
  • Remove the plastic cover with a Plastic Opening Tool by gently sliding the tool underneath the plastic and pry the cover off.

Adicionar comentário

Remove the paper with a Plastic Opening Tool by gently sliding the tool underneath and prying the paper away from the phone.
  • Remove the paper with a Plastic Opening Tool by gently sliding the tool underneath and prying the paper away from the phone.

Adicionar comentário

Remove the rubber stopper with a Plastic Opening Tool by gently sliding the tool underneath and pry away from the phone. Remove the rubber stopper with a Plastic Opening Tool by gently sliding the tool underneath and pry away from the phone.
  • Remove the rubber stopper with a Plastic Opening Tool by gently sliding the tool underneath and pry away from the phone.

Adicionar comentário

Remove the two screws. Remove the 2 21mm screws by using a Philips #1 screwdriver.
  • Remove the two screws.

    • Remove the 2 21mm screws by using a Philips #1 screwdriver.

Adicionar comentário

Pull apart the handset by pulling the shell away from the other half of the phone.
  • Pull apart the handset by pulling the shell away from the other half of the phone.

Adicionar comentário

Remove 3 screws attaching the logic board to shell. Remove the 13mm screw with a Philips #1 screwdriver.
  • Remove 3 screws attaching the logic board to shell.

    • Remove the 13mm screw with a Philips #1 screwdriver.

    • Remove the 2 13mm screws with washers with a Philips #1 screwdriver.

Adicionar comentário

Slide out the phone jack from the shell by gently lifting up the phone jack. Slide out the phone jack from the shell by gently lifting up the phone jack.
  • Slide out the phone jack from the shell by gently lifting up the phone jack.

Adicionar comentário

Without removing the logic board completely, pivot the logic board out of shell.
  • Without removing the logic board completely, pivot the logic board out of shell.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Alles Rebel

Member since: 20-09-2012

63 reputação

3 Guides authored

Equipe

Cal Poly, Team 16-59, Forte Fall 2012 Membro de Cal Poly, Team 16-59, Forte Fall 2012

CPSU-FORTE-F12S16G59

4 Membros

8 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 6

Todo: 2,121