Ir para o conteúdo principal

Disassembling Garmin Nuvi 1200 Logic Board

O que você precisa

  1. Disassembling Garmin Nuvi 1200 Logic Board, Logic Board: passo 1, imagem 1 %32
    • Remove to sticker on the back of the unit and then remove the two T5 scremws once this is done use a spudger to carefully pry off the silver cover.

    • Once the tool is inserted it can slide around the entire device.

  2. Disassembling Garmin Nuvi 1200 Logic Board: passo 2, imagem 1 %32
    • Remove four small T5 torx screws.

    • Be gentle, the screws are easily stripped.

  3. Disassembling Garmin Nuvi 1200 Logic Board: passo 3, imagem 1 %32 Disassembling Garmin Nuvi 1200 Logic Board: passo 3, imagem 2 %32
    • Lift cover off of unit.

    • Be careful not to lose small rubber piece on the bottom right corner.

  4. Disassembling Garmin Nuvi 1200 Logic Board: passo 4, imagem 1 %32
    • Disconnect ribbon cable from logic board.

  5. Disassembling Garmin Nuvi 1200 Logic Board: passo 5, imagem 1 %32
    • Remove two T5 torx screws holding down logic board.

    • Disconnect battery.

  6. Disassembling Garmin Nuvi 1200 Logic Board: passo 6, imagem 1 %32
    • Gently lift the logic board out of the unit

    • Be careful not to damage the battery connector on the top of the unit.

Conclusão

To reassemble your device, follow these instructions in reverse order.

6 outras pessoas executaram este guia.

Zachary Landau

Membro desde: 11/28/10

206 Reputação

Autoria de 1 guia

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 2

Duração total: 5,221