Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Peças e ferramentas

Introdução

The LCD display can be removed and replaced if it is cracked or broken.

Peças

Nenhum componente especificado.

  1. Remove the 2 screws (2.41 mm long) on the side of the camera next to the LCD screen. Remove the 2 screws (4.08 mm) on the other side.  One is located under the rubber USB flap. Remove the last screw (2.59 mm) located on the bottom of the camera.
    • Remove the 2 screws (2.41 mm long) on the side of the camera next to the LCD screen.

    • Remove the 2 screws (4.08 mm) on the other side. One is located under the rubber USB flap.

    • Remove the last screw (2.59 mm) located on the bottom of the camera.

    • Slowly pull the back cover of the camera.

  2. Kits para o Nintendo Switch

    Um reparo rápido para reiniciar o jogo

    Confira kits para o Nintendo Switch

    Kits para o Nintendo Switch

    Um reparo rápido para reiniciar o jogo

    Confira kits para o Nintendo Switch
  3. Remove the screws (2.88 mm) at the top right corner and bottom left corner of the LCD screen. Disconnect the ribbons connecting the screen to the camera. Lift off the screen.
    • Remove the screws (2.88 mm) at the top right corner and bottom left corner of the LCD screen.

    • Disconnect the ribbons connecting the screen to the camera.

    • Lift off the screen.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Ben Tupas

Membro desde: 13/01/2011

317 Reputação

3 Guias de autoria

Equipe

Cal Poly, Team 13-3, Forte Winter 2011 Membro de Cal Poly, Team 13-3, Forte Winter 2011

CPSU-FORTE-W11S13G3

5 Membros

8 Guias de autoria

Hm. "Disconnect the ribbons" resulted in a torn ribbon, and so a dead camera, I think. This also doesn't say how to take the LCD screen out of its frame. Alas.

Maelduin - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 2,174