Introdução

Use this guide to replace a damaged front cover or to access the inner parts of the camera.

Peças

Não são necessárias peças.

Remove the two 3mm (1/8") black screws from the side cover using a #00 Phillips screwdriver.
  • Remove the two 3mm (1/8") black screws from the side cover using a #00 Phillips screwdriver.

Adicionar comentário

On the bottom, remove the 6mm (13/64") screw with the #00 Phillips Screwdriver.
  • On the bottom, remove the 6mm (13/64") screw with the #00 Phillips Screwdriver.

  • Pry up the panel; starting from the front/bottom corner, as indicated.

    • There's a concealed lip, under the opposite edge.

Adicionar comentário

Remove three medium length screws from the bottom of the camera
  • Remove three medium length screws from the bottom of the camera

Adicionar comentário

Remove the two medium length screws on the front panel of the camera above the lens mount.
  • Remove the two medium length screws on the front panel of the camera above the lens mount.

  • Once you done, you may use the Spudger to panel from non-grip side.

  • If you start on the grip side, it will be more challenging to loosen the panel.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Daniel Bussone

Member since: 28-01-2011

1.206 reputação

11 Guides authored

Equipe

Cal Poly, Team 3-41, Regan Winter 2011 Membro de Cal Poly, Team 3-41, Regan Winter 2011

CPSU-REGAN-W11S3G41

2 Membros

11 Guides authored

This should be labelled: Easy.

tjt263 - Responder

Okay, there are several steps missing.

tjt263 - Responder

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 5

Últimos 7 dias: 16

Últimos 30 dias: 40

Todo: 4,136