Ir para o conteúdo principal

Disassembling Arnova 7K G3 Motherboard

O que você precisa

  1. Disassembling Arnova 7K G3 Motherboard, Rear Cover: passo 1, imagem 1 %32 Disassembling Arnova 7K G3 Motherboard, Rear Cover: passo 1, imagem 2 %32 Disassembling Arnova 7K G3 Motherboard, Rear Cover: passo 1, imagem 3 %32
    • Remove four 5 mm Phillips #00 screws from each corner of the tablet.

  2. Disassembling Arnova 7K G3 Motherboard: passo 2, imagem 1 %32 Disassembling Arnova 7K G3 Motherboard: passo 2, imagem 2 %32
    • Place the iFixit opening tool in the notches between the cases and pull the covers apart.

  3. Disassembling Arnova 7K G3 Motherboard: passo 3, imagem 1 %32
    • Repeat step two until 3/4 of the rear cover is unlatched.

    • Proceed to remove the rear cover by gently pulling it apart by hand.

  4. Disassembling Arnova 7K G3 Motherboard, Disassembling Arnova 7K G3 Logic Board Ribbon Connectors: passo 4, imagem 1 %32 Disassembling Arnova 7K G3 Motherboard, Disassembling Arnova 7K G3 Logic Board Ribbon Connectors: passo 4, imagem 2 %32
    • Peel the copper tape covering the ribbon connector with a set of tweezers.

  5. Disassembling Arnova 7K G3 Motherboard: passo 5, imagem 1 %32 Disassembling Arnova 7K G3 Motherboard: passo 5, imagem 2 %32 Disassembling Arnova 7K G3 Motherboard: passo 5, imagem 3 %32
    • Locate the two gray pins on the ribbon connector.

    • Grab the first pin with tweezers and gently pull it towards the ribbon. Repeat the step.

    • Gently pull the ribbon cable out of the connection port.

  6. Disassembling Arnova 7K G3 Motherboard: passo 6, imagem 1 %32 Disassembling Arnova 7K G3 Motherboard: passo 6, imagem 2 %32 Disassembling Arnova 7K G3 Motherboard: passo 6, imagem 3 %32
    • Locate the ribbon connector two.

    • Locate the pins of ribbon connector two. Repeat step two for unlocking the pins.

    • Gently pull the ribbon out of the connection port.

  7. Disassembling Arnova 7K G3 Motherboard, Disassembling Arnova 7K G3 Motherboard: passo 7, imagem 1 %32
    • Remove the two Phillips #00 screws from the motherboard.

  8. Disassembling Arnova 7K G3 Motherboard: passo 8, imagem 1 %32
    • Gently lift up the motherboard and reorient it in a more efficient manner in order to locate the desired components.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Kue

Membro desde: 03/18/15

301 Reputação

Autoria de 3 guias

Equipe

Michigan Tech, Team 1-2, Lauer Spring 2015 Membro de Michigan Tech, Team 1-2, Lauer Spring 2015

MTU-LAUER-S15S1G2

Membros da 2

Autoria de 10 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 2

Duração total: 402