Introdução

Disassembly

1. Flip toaster over.

2. Locate four phillips screws on the bottom of the toaster.

3. Loosen and remove.

4. Sides will pop out once screws are removed.

  1. 1. Flip toaster over.
    • 1. Flip toaster over.

    Adicionar comentário

  2. 2. Locate four phillips screws on the bottom of the toaster.
    • 2. Locate four phillips screws on the bottom of the toaster.

    Adicionar comentário

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • 3. Loosen and remove using a Phillips head screwdriver

    Adicionar comentário

    • 4. Sides will pop out once screws are removed.

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Carlos

Member since: 23-07-2013

101 reputação

Autoria de 1 guia

Equipe

Hi Carlos,

Before removing the cover I need to remove the PUSH LEVER.

Please forward instructions on HOW TO REMOVE THE PUSH LEVER.

Thank you.

Earle

earleb - Responder

I Disassembled, cleaned and put it back together.  However the purpose of the exercise was to fix the browning feature or timing issue.  the little plastic bit that goes from the browning turn knob does not function.  So the push knob does not stay down.  This results in having to hold the push knob down till the toast is done to my satisfaction.  The little plastic bit does not connect properly to the PCB or whatever else it is connected to, and so the push knob on the side of the toaster does not stay down.. Allan

Allan Rodrigues - Responder

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 2

Últimos 30 dias: 10

Todo: 658