Conserte seus objetos Comunidade Loja

DigiLand DL1010Q Rear Case Replacement

Introdução

This guide will allow you to access the inside parts of this device

O que você precisa

  1. DigiLand DL1010Q Rear Case Replacement, Rear Case: passo 1, imagem 1 %32

    • With a J00 Philips head screwdriver, unscrew the two 4mm black screws located at the bottom of the device.

    • Before disassembling your device, be sure it is powered off.

    Editar

  3. DigiLand DL1010Q Rear Case Replacement: passo 2, imagem 1 %32 DigiLand DL1010Q Rear Case Replacement: passo 2, imagem 2 %32

    • Using a plastic opening tool, begin softly prying open device by first inserting it in between the front and back panels.

    • Continue prying the edges while moving around the device's perimeter until the back can be easily removed.

    Editar

  4. DigiLand DL1010Q Rear Case Replacement: passo 3, imagem 1 %32

    • Carefully lift back panel away from the body of the device.

    • Speaker wires are connected to both the front and back panel.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 1

Duração total: 507