Dexter Corded Circular Saw - 1300CIS2-185.5 Height Adjustment Replacement - Guia de Reparo iFixit

Introdução

By the end of they guide you will have adjusted the height of the device

O que você precisa

Passo 1 Unplug

Dexter Corded Circular Saw - 1300CIS2-185.5 Height Adjustment Replacement, Unplug: passo 1, imagem 1 %32

Before you begin, remember to disconnect the mains plug.

Passo 2

Dexter Corded Circular Saw - 1300CIS2-185.5 Height Adjustment Replacement: passo 2, imagem 1 %32

Dexter Corded Circular Saw - 1300CIS2-185.5 Height Adjustment Replacement: passo 2, imagem 2 %32

Remove the dust extraction nozzle, blade and edge guide.
Refer to the instructions for the device to remove them.

Passo 3

Dexter Corded Circular Saw - 1300CIS2-185.5 Height Adjustment Replacement: passo 3, imagem 1 %32

Open wide to free up space for a better work area.

Passo 4

Using a large pat screwdriver, remove the small pin.

Passo 5

Then remove the black rod.

Passo 6

And finally unscrew the nut.

Passo 7

Dexter Corded Circular Saw - 1300CIS2-185.5 Height Adjustment Replacement: passo 7, imagem 1 %32

Here is the order of the parts to remove.

Passo 8

Dexter Corded Circular Saw - 1300CIS2-185.5 Height Adjustment Replacement: passo 8, imagem 1 %32

Dexter Corded Circular Saw - 1300CIS2-185.5 Height Adjustment Replacement: passo 8, imagem 2 %32

Then we replace the height adjustment.

Passo 9

Dexter Corded Circular Saw - 1300CIS2-185.5 Height Adjustment Replacement: passo 9, imagem 1 %32

Dexter Corded Circular Saw - 1300CIS2-185.5 Height Adjustment Replacement: passo 9, imagem 2 %32

Finally put each piece back in order.
To tighten, simply replace the tray at the bottom and hand tighten the nut.
With the lever, take the nut and put it in the locked position without effort
It should be tight but not touching the board.

Passo 10

Dexter Corded Circular Saw - 1300CIS2-185.5 Height Adjustment Replacement: passo 10, imagem 1 %32

Dexter Corded Circular Saw - 1300CIS2-185.5 Height Adjustment Replacement: passo 10, imagem 2 %32

Replace the blade, edge guide, and extraction bit on the saw.

Conclusão

to reassemble perform the steps in reverse order.

Um agradecimento especial a esses tradutores:

fr en

100%

HelloMacOS

HelloMacOS está nos ajudando a consertar o mundo! Quer contribuir?
Comece a traduzir ›

Autor(a)

com 1 outro contribuidor

Céline Chemineau

Membro desde: 01/29/20

16.581 Reputação

Autoria de 95 guias

+9 outros emblemas

Equipe

Leroy Merlin Membro de Leroy Merlin

Community

Membros da 36

Autoria de 239 guias

0 comentários

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 6

Últimos 30 dias: 32

Duração total: 1,241