Conserte seus objetos Comunidade Loja

Dexter 900W Corded Hammer Drill - 900ID2.5 Rotor Replacement

Introdução

This guide will take you through the steps of replacing the rotor on your device

O que você precisa

  1. Dexter 900W Corded Hammer Drill - 900ID2.5 Rotor Replacement, Unplug: passo 1, imagem 1 %32

    • Before you begin, remember to disconnect the mains plug.

    Traduzir

  2. Dexter 900W Corded Hammer Drill - 900ID2.5 Rotor Replacement: passo 2, imagem 1 %32 Dexter 900W Corded Hammer Drill - 900ID2.5 Rotor Replacement: passo 2, imagem 2 %32

    • Remove the handle from the machine.

    Traduzir

  3. Dexter 900W Corded Hammer Drill - 900ID2.5 Rotor Replacement: passo 3, imagem 1 %32 Dexter 900W Corded Hammer Drill - 900ID2.5 Rotor Replacement: passo 3, imagem 2 %32

    • Using a screwdriver or screwdriver, unscrew and open the device.

    Traduzir

  4. Dexter 900W Corded Hammer Drill - 900ID2.5 Rotor Replacement: passo 4, imagem 1 %32

    • Unscrew the four screws.

    Traduzir

    • Using a screwdriver, lift the spring of the two brushes.

    Traduzir

    • Lift the rotor and the stator and disassemble them.

    Traduzir

  8. Dexter 900W Corded Hammer Drill - 900ID2.5 Rotor Replacement: passo 7, imagem 1 %32 Dexter 900W Corded Hammer Drill - 900ID2.5 Rotor Replacement: passo 7, imagem 2 %32

    • Disassemble the two parts.

    Traduzir

  9. Dexter 900W Corded Hammer Drill - 900ID2.5 Rotor Replacement: passo 8, imagem 1 %32

    • Before reassembling the new part, be sure to re-grease.

    Traduzir

  10. Dexter 900W Corded Hammer Drill - 900ID2.5 Rotor Replacement: passo 9, imagem 1 %32 Dexter 900W Corded Hammer Drill - 900ID2.5 Rotor Replacement: passo 9, imagem 2 %32

    • Reassemble the two parts and replace them in their place.

    Traduzir

    • Reposition the brush springs.

    Traduzir

  12. Dexter 900W Corded Hammer Drill - 900ID2.5 Rotor Replacement: passo 11, imagem 1 %32

    • Then retighten the four screws.

    Traduzir

  13. Dexter 900W Corded Hammer Drill - 900ID2.5 Rotor Replacement: passo 12, imagem 1 %32 Dexter 900W Corded Hammer Drill - 900ID2.5 Rotor Replacement: passo 12, imagem 2 %32

    • Before closing, check that no cable is blocked and that each part is in its place.

    • Tighten the screws to close the device.

    Traduzir

  14. Dexter 900W Corded Hammer Drill - 900ID2.5 Rotor Replacement: passo 13, imagem 1 %32 Dexter 900W Corded Hammer Drill - 900ID2.5 Rotor Replacement: passo 13, imagem 2 %32

    • Finally replace the handle.

    Traduzir
Conclusão

By the end of the guide you will have successfully replaced the rotor

To reassemble perform the steps in reverse

Um agradecimento especial a esses tradutores:

fr en

100%

HelloMacOS

HelloMacOS está nos ajudando a consertar o mundo! Quer contribuir?
Comece a traduzir ›

Autor(a)

com 1 outro contribuidor

Céline Chemineau

Membro desde: 01/29/20

16.581 Reputação

Autoria de 95 guias

Emblemas: 12

+9 outros emblemas

Equipe

Leroy Merlin Membro de Leroy Merlin

Community

Membros da 36

Autoria de 239 guias

Um comentário

Hi,

Nice post and video but where can I purchase a new rotor for my drill?-the 2 links in the post do not work.

Thanks!

Nick Berrow - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 5

Últimos 30 dias: 27

Duração total: 432