Conserte seus objetos Comunidade Loja

Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement

Introdução

This tutorial shows you the change of only one carbon, to change the second you just have to follow the same method.

O que você precisa

  1. Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement, Unplug: passo 1, imagem 1 %32

    • Before you begin, remember to disconnect the mains plug.

    Traduzir

  2. Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: passo 2, imagem 1 %32 Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: passo 2, imagem 2 %32

    • Remove the three screws from the pad.

    Traduzir

  3. Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: passo 3, imagem 1 %32 Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: passo 3, imagem 2 %32 Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: passo 3, imagem 3 %32

    • Be careful to keep the three small marbles.

    Traduzir

  4. Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: passo 4, imagem 1 %32 Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: passo 4, imagem 2 %32

    • Unscrew the screws to open the shell.

    Traduzir

  5. Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: passo 5, imagem 1 %32

    • Remove the orange cap.

    Traduzir

    • Using a screwdriver lift the brushes.

    Traduzir

  8. Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: passo 7, imagem 1 %32 Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: passo 7, imagem 2 %32 Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: passo 7, imagem 3 %32

    • Remove the carbon from its housing then take it out.

    • Using pliers, fold down the small tab.

    Traduzir

  9. Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: passo 8, imagem 1 %32

    • Replace the new carbon in its carbon holder.

    Traduzir

    • Reconnect the carbon, test if the carbon slides well inside.

    Traduzir

  11. Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: passo 10, imagem 1 %32

    • Replace the coals in their housing.

    Traduzir

  12. Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: passo 11, imagem 1 %32

    • Before closing, check that no cable is blocked and that each part is in its place.

    • Replace the screws on the hull.

    Traduzir

  13. Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: passo 12, imagem 1 %32 Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: passo 12, imagem 2 %32 Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: passo 12, imagem 3 %32

    • Replace the retaining flange, be careful to have the three small balls.

    Traduzir

  14. Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: passo 13, imagem 1 %32 Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: passo 13, imagem 2 %32

    • Tighten the three screws of the retaining plate then that of the pad.

    Traduzir
Conclusão

To reassemble follow guide through or in reverse

Um agradecimento especial a esses tradutores:

fr en

100%

HelloMacOS

HelloMacOS está nos ajudando a consertar o mundo! Quer contribuir?
Comece a traduzir ›

Autor(a)

com 1 outro contribuidor

Céline Chemineau

Membro desde: 01/29/20

16.581 Reputação

Autoria de 95 guias

Emblemas: 12

+9 outros emblemas

Equipe

Leroy Merlin Membro de Leroy Merlin

Community

Membros da 36

Autoria de 239 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 1

Últimos 30 dias: 5

Duração total: 162