Introdução

In this guide, we will be showing you how to remove the Hard Drive.

Peças

Não são necessárias peças.

  1. Disconnect the battery cable from the system board.
    • Disconnect the battery cable from the system board.

      • Remove the screws that secure the battery to the palm-rest assembly.

        • Lift the battery, along with its cable, off the palm-rest assembly.

    • Turn the computer over, open the display, and press the power button for about five seconds to ground the system board.

    • If this is all you are doing Follow Step In Reverse if not Go to Next Step.

  2. Remove the screw that secures the mSATA card to the palm-rest assembly.
    • Remove the screw that secures the mSATA card to the palm-rest assembly.

      • Slide the mSATA card out of the mSATA-card connector.

    • If this is all you are doing Follow Step In Reverse if not Go to Next Step.

Linha de Chegada

Uma outra pessoa concluiu este guia.

Johnathan Hammond

Member since: 28-02-2018

35.851 reputação

408 Guides authored

Equipe

Informative Technologies Inc. Membro de Informative Technologies Inc.

Community

15 Membros

925 Guides authored

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 2

Últimos 30 dias: 7

Todo: 106