Conserte seus objetos Comunidade Loja

Dell Wyse Xn0m Mouse Sensor Board Replacement

Introdução

As one of the key features of a laptop, the mouse pad is one of the elements of the device that is most likely to suffer wear over time. The right/left click buttons are especially susceptible to wear and tear, as these are mechanical systems connected to electrical boards.

If your left-click or right-click buttons aren't working, you may need to replace the board that controls those functions. Use this guide to learn how!

O que você precisa

  1. Dell Wyse Xn0m Mouse Sensor Board Replacement, Mouse Sensor Board: passo 1, imagem 1 %32

    • Flip the device over. Unscrew nine marked 7mm Phillips #1 screws.

    Editar

  2. Dell Wyse Xn0m Mouse Sensor Board Replacement: passo 2, imagem 1 %32 Dell Wyse Xn0m Mouse Sensor Board Replacement: passo 2, imagem 2 %32

    • Remove the keyboard by pushing back the tabs at the marked locations with a spudger or plastic opening tool.

    Editar

  4. Dell Wyse Xn0m Mouse Sensor Board Replacement: passo 3, imagem 1 %32 Dell Wyse Xn0m Mouse Sensor Board Replacement: passo 3, imagem 2 %32

    • Turn the device around so the screen is closest to you. Lift the keyboard and detach the ribbon cable with the spudger.

    • To disconnect the cable, disengage the locking tab of the ZIF connector with the spudger and pull the cable out gently.

    Editar

  5. Dell Wyse Xn0m Mouse Sensor Board Replacement: passo 4, imagem 1 %32

    • Remove the keyboard and set it aside. Detach the other ribbon cables with the spudger.

    • Remove five 8mm Phillips #1 screws.

    Editar

  6. Dell Wyse Xn0m Mouse Sensor Board Replacement: passo 5, imagem 1 %32

    • Pry open the laptop with the plastic opening tool.

    Editar

  7. Dell Wyse Xn0m Mouse Sensor Board Replacement: passo 6, imagem 1 %32 Dell Wyse Xn0m Mouse Sensor Board Replacement: passo 6, imagem 2 %32

    • Under the trackpad, detach the ribbon cables with the spudger.

    • Unscrew two 3mm Phillips #1 screws and lift the board from the pegs.

    • Remove the board from the laptop.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 5

Últimos 30 dias: 11

Duração total: 592