Peças

Não são necessárias peças.

  1. Remove the screws that secure the base cover to the computer.
    • Remove the screws that secure the base cover to the computer.

  2. Pry the base cover along the edges to loosen it.
    • Pry the base cover along the edges to loosen it.

  3. Lift and remove the base cover from the computer.
    • Lift and remove the base cover from the computer.

    • If this is all you are doing Follow Step In Reverse if not Go to Next Step.

  4. Free shipping on all orders over US$100,00 or containing a Pro Tech Toolkit!

    Visite Nossa Loja
  5. Disconnect the battery cable from its connector on the system board.
    • Disconnect the battery cable from its connector on the system board.

  6. Release the tabs that secure the battery in the battery bay.
    • Release the tabs that secure the battery in the battery bay.

  7. Lift and remove the battery from the computer.
    • Lift and remove the battery from the computer.

    • If this is all you are doing Follow Step In Reverse if not Go to Next Step.

  8. Pry the securing clips away from the memory module until it pops up. Remove the memory module from its connector on the system board.
    • Pry the securing clips away from the memory module until it pops up. Remove the memory module from its connector on the system board.

    • If this is all you are doing Follow Step In Reverse if not Go to Next Step.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Johnathan Hammond

Member since: 28-02-2018

35.962 reputação

408 Guides authored

Equipe

Informative Technologies Inc. Membro de Informative Technologies Inc.

Community

15 Membros

925 Guides authored

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 22

Todo: 149