Peças

Não são necessárias peças.

Remove the screws that secure the base cover to the computer.
  • Remove the screws that secure the base cover to the computer.

Adicionar comentário

Pry the base cover along the edges to loosen it.
  • Pry the base cover along the edges to loosen it.

Adicionar comentário

  • Lift and remove the base cover from the computer.

  • If this is all you are doing Follow Step In Reverse if not Go to Next Step.

Adicionar comentário

  • Disconnect the battery cable from its connector on the system board.

Adicionar comentário

  • Release the tabs that secure the battery in the battery bay.

Adicionar comentário

  • Lift and remove the battery from the computer.

  • If this is all you are doing Follow Step In Reverse if not Go to Next Step.

Adicionar comentário

  • Lift the hard drive assembly in an upward direction to release it from its compartment on the computer. Remove the hard drive from the computer.

Adicionar comentário

  • Remove the screws that secure the hard drive to the hard drive assembly.

    • Lift and remove the hard drive from the hard drive assembly.

  • If this is all you are doing Follow Step In Reverse if not Go to Next Step.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Johnathan Hammond

Member since: 28-02-2018

35.419 reputação

408 Guides authored

Equipe

Informative Technologies Inc. Membro de Informative Technologies Inc.

Community

15 Membros

917 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 5

Últimos 30 dias: 22

Todo: 95