Pular para o conteúdo principal
  1. Loosen the M2.5x2+3.5 captive screws that secure the base cover to the computer [1]. Pry the base cover from the edge [2].
    • Loosen the M2.5x2+3.5 captive screws that secure the base cover to the computer [1].

    • Pry the base cover from the edge [2].

    • Lift the base cover away from the computer

  2. kits de reparo de baterias de iPhone

    Only $29.99

    Buy Now

    kits de reparo de baterias de iPhone

    Only $29.99

    Buy Now
  3. Disconnect the battery cable from the connector on the system board [1]. Remove the M2x3L screws that secure the battery to the computer [2].
    • Disconnect the battery cable from the connector on the system board [1].

    • Remove the M2x3L screws that secure the battery to the computer [2].

  4. Pry the clips securing the memory module until the memory pops-up [1]
    • Pry the clips securing the memory module until the memory pops-up [1]

    • Lift the memory module away from the connector [2].

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Johnathan Hammond

Membro desde: 28-02-2018

35.861 reputação

408 Guias de autoria

Equipe

Informative Technologies Inc. Membro de Informative Technologies Inc.

Community

15 Membros

930 Guias de autoria

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 5

Todo: 104