Peças

Não são necessárias peças.

Slide the release latch to unlock the battery. Flip and remove the battery from the computer.
  • Slide the release latch to unlock the battery.

    • Flip and remove the battery from the computer.

Adicionar comentário

Remove the screws that secure the base cover to the computer. Press the rubber tabs towards the rear of the computer to disengage the base cover. Flip and remove the base cover from the computer.
  • Remove the screws that secure the base cover to the computer. Press the rubber tabs towards the rear of the computer to disengage the base cover.

    • Flip and remove the base cover from the computer.

Adicionar comentário

Remove the screws that secure the hard drive to the computer. Slide the hard -drive latch to the unlock position and pull out the hard drive from the computer.
  • Remove the screws that secure the hard drive to the computer. Slide the hard -drive latch to the unlock position and pull out the hard drive from the computer.

Adicionar comentário

Flex the hard-drive bracket outward and pull out the hard drive from the bracket.
  • Flex the hard-drive bracket outward and pull out the hard drive from the bracket.

  • NOTE: A rubber filler is installed to the hard-drive bracket for 7 mm hard drives. It is designed to prevent vibrations and for correct installation of the 7 mm hard drives. 9 mm hard drives do not require the filler when installed into the hard-drive bracket.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Johnathan Hammond

Member since: 28-02-2018

14.623 reputação

413 Guides authored

Equipe

Informative Technologies Inc. Membro de Informative Technologies Inc.

Community

15 Membros

749 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 3

Últimos 30 dias: 16

Todo: 16