Introdução

Replace the Upper Fan in the computer tower to prevent overheating and computer damage.

Peças

Não são necessárias peças.

  1. Make sure the computer is turned off, by selecting the start menu and choosing “Shut Down”.
    • Make sure the computer is turned off, by selecting the start menu and choosing “Shut Down”.

    • Ensure all cables, speakers and other devices are unplugged and turned off before opening the computer case.

  2. Lay the computer on its side; you will see a blue knob.
    • Lay the computer on its side; you will see a blue knob.

    • Turn this knob 90 deg clockwise.

    • Slide the panel case forward about 1/2 inch while knob is turned.

    • Lift panel case off computer.

    • Remove the large blue cover from the computer. There are no screws or tabs holding it in place.

    • Remove the power supply that connects the upper fan to the motherboard. The power supply has black, red, green and yellow wires.

    • Remove the rubber grommets from the base of the fan. A screwdriver or spudger may be useful.

    • Pull the upper fan out of the computer.

Conclusão

To reassemble your device, follow these instructions in reverse order.

7 outras pessoas concluíram este guia.

Tom

Member since: 04-10-2010

799 reputação

7 Guides authored

Equipe

Cal Poly, Team 22-4, Maness Fall 2010 Membro de Cal Poly, Team 22-4, Maness Fall 2010

CPSU-MANESS-F10S22G4

4 Membros

13 Guides authored

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 2

Últimos 30 dias: 10

Todo: 4,712