Introdução

Replace the Dead Battery on the Motherboard

Peças

Não são necessárias peças.

  1. Make sure the computer is turned off, by selecting the start menu and choosing “Shut Down”.
    • Make sure the computer is turned off, by selecting the start menu and choosing “Shut Down”.

    • Ensure all cables, speakers and other devices are unplugged and turned off before opening the computer case.

    Adicionar comentário

  2. Lay the computer on its side; you will see a blue knob.
    • Lay the computer on its side; you will see a blue knob.

    • Turn this knob 90 deg clockwise.

    Adicionar comentário

    • Slide the panel case forward about 1/2 inch while knob is turned.

    • Lift panel case off computer.

    Adicionar comentário

    • Unplug the blue cable that connects the hard drive to the motherboard.

    Adicionar comentário

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Unplug the power supply, distinguished by its red and yellow wires (yellow wire obscured from view).

    Adicionar comentário

    • Squeeze the release tabs on either side of the hard drive.

    Adicionar comentário

    • Slide the Hard Drive out while squeezing the tabs.

    Adicionar comentário

    • Under the hard drive, there is a circular, silver battery connected to the motherboard.

    • Use a spudger to gently pry the battery from the motherboard.

    Adicionar comentário

    • Lift the battery out of the motherboard.

    Adicionar comentário

    • Upon replacement, simply push the battery into the motherboard.

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

9 outras pessoas concluíram este guia.

Tom

Member since: 04-10-2010

799 reputação

7 Guides authored

Equipe

Cal Poly, Team 22-4, Maness Fall 2010 Membro de Cal Poly, Team 22-4, Maness Fall 2010

CPSU-MANESS-F10S22G4

4 Membros

13 Guides authored

that particular battery holder looked hard to get out- no pop out lever, thought i’d break it gouging it out!

neverts “itchytastyurr” ennud - Responder

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 9

Todo: 10,958