1. Power down your PC and remove the power cord from the back.
    • Power down your PC and remove the power cord from the back.

    Adicionar comentário

  2. Press and hold the power button for about 10 seconds, then release.
    • Press and hold the power button for about 10 seconds, then release.

      • This helps drain any remaining power stored in the capacitors, so that you can safely work on the internal components.

    Adicionar comentário

    • With the computer standing upright, firmly pull on the tab at the back of the computer.

    • When the side panel pops free, gently pull the panel away from the computer.

    • If you have trouble freeing the side panel from the case, you may need to pull the tab a bit harder.

    Adicionar comentário

    • Unplug your hard drives power and data cables.

    Adicionar comentário

    • Unplug the power and data cables.

    Adicionar comentário

    • Unplug the fan.

    Adicionar comentário

    • Remove the two Phillips #2 screws.

    Adicionar comentário

    • Pull the heat sink up.

    Adicionar comentário

    • Pull the two tabs and pull it out.

    • This needs a lot of force to take it off.

    Adicionar comentário

    • To take the fan out you have to pull the two tabs and pull the fan out.

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Padraic Hoselton

Member since: 22-08-2017

2.800 reputação

13 Guides authored

Equipe

Master Techs Membro de Master Techs

Community

278 Membros

755 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 6

Últimos 30 dias: 27

Todo: 469