Menu

Your Settings

My Workbench

Ganhe acesso rapidamente a guias, partes e respostas para seus dispositivos
Carrinho

Parece que seu carrinho de compras está vazio

Visite Nossa Loja

Dell Latitude D610 Fan Replacement

Escrito Por: Jordan Barham (and 2 other contributors)
  • Comentários: 0
  • Favoritos: 4
  • Execuções: 1

Dificuldade

Moderado

Passos

11

Tempo necessário

10 - 15 minutos

Seções

3

Sinalizadores

0

Introdução

Replacing a defective fan will stop your computer from overheating, preventing damage and increasing the life of your computer.

Ferramentas

Comprar estas ferramentas

Peças

  1. Passo 1 Battery

    Remove the 3.9 mm Phillips #1 screw from the battery compartment.

    • Remove the 3.9 mm Phillips #1 screw from the battery compartment.

    Editar

    Adicionar comentário

  2. Passo 2

    Locate the laptop battery release button lock

    • Locate the laptop battery release button lock

    • Push the battery release in the direction of the arrow, and pull upward.

    Editar

    Adicionar comentário

  3. Passo 3

    • Remove the battery from its compartment.

    Editar

    Adicionar comentário

  4. Passo 4 Keyboard

    • Use an opening tool or flat tool to remove the plastic cover above the keyboard.

    Editar

    Adicionar comentário

  5. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12

  6. Passo 5

    • Remove the two 3.9mm Philips #1 screws that are holding the keyboard in place.

    Editar

    Adicionar comentário

  7. Passo 6

    • Using an opening tool, carefully release the keyboard from the case.

    • Making sure not to tear or damage the wires still connecting it to the laptop.

    Editar

    Adicionar comentário

  8. Passo 7

    • Carfully lift the key board.

    • Lift only about 3 - 4 inches so that the wires holding the keyboard do not get damaged.

    • Pull on the blue tab to unplug the keyboard.

    Editar

    Adicionar comentário

  9. Passo 8 Fan

    • Remove the two 3.9mm Philips #1 screws from the case.

    Editar

    Adicionar comentário

  10. Passo 9

    • Remove the sixteen 3.9mm Philips #1 screws from the back.

    Editar

    Adicionar comentário

  11. Passo 10

    • Turn the computer over. Using an opening tool seperate the top cover from the rest of the frame.

    • Do not open the computer too widely or quickly. Doing so will result in damage to the computer.

    Editar

    Adicionar comentário

  12. Passo 11

    • Remove the 3.9 mm Philips #1 screw.

    • Unplug the fan cable.

    • Lift fan out of compartment to remove the fan.

    Editar

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Autor

with 2 other contributors

Jordan Barham

Member since: 26-01-2014

402 reputação

3 Guides authored

Emblemas: 7

+4 emblemas

Equipe

Cal Poly, Team 6-24, Maness Winter 2014 Membro de Cal Poly, Team 6-24, Maness Winter 2014

CPSU-MANESS-W14S6G24

4 Membros

5 Guides authored

0 comentários

Adicionar um comentário

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 2

Últimos 30 dias: 11

Todo: 2,446