Ir para o conteúdo principal
  1. Dell Inspiron One 2020 Hard Drive Replacement, Back Cover: passo 1, imagem 1 %32 Dell Inspiron One 2020 Hard Drive Replacement, Back Cover: passo 1, imagem 2 %32 Dell Inspiron One 2020 Hard Drive Replacement, Back Cover: passo 1, imagem 3 %32
    • Place the all in one computer face down on a soft, clean surface to avoid scratching the front.

    • Press the tab on the stand cover and lift up.

  2. Dell Inspiron One 2020 Hard Drive Replacement: passo 2, imagem 1 %32 Dell Inspiron One 2020 Hard Drive Replacement: passo 2, imagem 2 %32 Dell Inspiron One 2020 Hard Drive Replacement: passo 2, imagem 3 %32
    • Remove the four phillips screws that attach the stand to the computer.

    • Tilt the stand up and out.

  3. Dell Inspiron One 2020 Hard Drive Replacement: passo 3, imagem 1 %32 Dell Inspiron One 2020 Hard Drive Replacement: passo 3, imagem 2 %32 Dell Inspiron One 2020 Hard Drive Replacement: passo 3, imagem 3 %32
    • Starting from the optical drive, pry the back cover up with a plastic spudger.

    • The cover is held in place by fragile plastic clips. Careful to not break them.

  4. Dell Inspiron One 2020 Hard Drive Replacement, Hard Drive: passo 4, imagem 1 %32 Dell Inspiron One 2020 Hard Drive Replacement, Hard Drive: passo 4, imagem 2 %32
    • Remove the three screws that hold the hard drive cage to the chassis.

  5. Dell Inspiron One 2020 Hard Drive Replacement: passo 5, imagem 1 %32 Dell Inspiron One 2020 Hard Drive Replacement: passo 5, imagem 2 %32
    • Slide the hard drive cage out slightly to access and remove the power and SATA cable.

    • There isn't much slack in these cables, so don't slide the hard drive cage to far.

    • The power and SATA cables are connected together. On most other computers, these connectors are separate.

    • Lift the hard drive cage out.

  6. Dell Inspiron One 2020 Hard Drive Replacement: passo 6, imagem 1 %32 Dell Inspiron One 2020 Hard Drive Replacement: passo 6, imagem 2 %32 Dell Inspiron One 2020 Hard Drive Replacement: passo 6, imagem 3 %32
    • Remove the four screws (two on each side) that attach the hard drive cage to the hard drive.

    • Lift the hard drive cage off the hard drive.

Conclusão

To reassemble your device, follow these instructions in reverse order.

34 outras pessoas concluíram este guia.

Tyler

Membro desde: 19/06/2012

4.821 Reputação

16 Guias de autoria

Equipe

TechForce Membro de TechForce

Business

2 Membros

18 Guias de autoria

3 comentários

Thanks for this info this is very useful

Thank you once again

Ketan Valsangkar - Responder

Good Job, short and sweet and easy to follow

schmidtrg - Responder

Really useful information thank you.

Jessie Colon - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 4

Últimos 7 dias: 23

Últimos 30 dias: 146

Duração total: 33,361