Introdução

Follow this guide to replace the top case of the Dell Inspiron 8600.

Peças

Não são necessárias peças.

Remove the battery from the bottom of the laptop.
  • Remove the battery from the bottom of the laptop.

  • Please click on the following link for further instruction on how to remove the battery. Dell Inspiron 9100 Battery Replacement

  • It is important to remove the battery so that you will not be electrocuted while working with the computer's hardware.

Adicionar comentário

Locate the small opening at the upper left of the top blue panel which houses the power button. Use a spudger to lift up and remove the blue panel. Caution: The hinge cover is still connected to the interior of the computer by a small black tab.
  • Locate the small opening at the upper left of the top blue panel which houses the power button.

  • Use a spudger to lift up and remove the blue panel.

  • Caution: The hinge cover is still connected to the interior of the computer by a small black tab.

Adicionar comentário

Locate the black tab at the upper right corner of the keyboard, and gently pull the black tab to the left to disconnect the hinge cover.
  • Locate the black tab at the upper right corner of the keyboard, and gently pull the black tab to the left to disconnect the hinge cover.

  • You should now be able to completely remove the hinge cover.

Adicionar comentário

Flip the laptop over and remove the indicated screws. Flip the laptop back over.
  • Flip the laptop over and remove the indicated screws.

  • Flip the laptop back over.

  • Find the two places where the display module is attached to the base of the computer.

Adicionar comentário

Disconnect the video card from the display module by gently lifting upwards on the black tab.
  • Disconnect the video card from the display module by gently lifting upwards on the black tab.

Adicionar comentário

Lift the display module directly upwards from the base of the computer. Lift the display module directly upwards from the base of the computer.
  • Lift the display module directly upwards from the base of the computer.

Adicionar comentário

The display module has been removed.
  • The display module has been removed.

Adicionar comentário

First, remove all tabs using a flat head/ finger. Next, remove all screws using a #1 Philips screwdriver. Pull apart top case from the lower case. It will be quite difficult to separate.
  • First, remove all tabs using a flat head/ finger.

  • Next, remove all screws using a #1 Philips screwdriver.

  • Pull apart top case from the lower case. It will be quite difficult to separate.

Adicionar comentário

Remove all screws on the top of the lcd There all several screw on each side of the LCD. Remove all. There all several screw on each side of the LCD. Remove all.
  • Remove all screws on the top of the lcd

  • There all several screw on each side of the LCD. Remove all.

Adicionar comentário

LCD should remove smoothly.
  • LCD should remove smoothly.

  • The top case will be what remains.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Perry

Member since: 12-04-2011

239 reputação

4 Guides authored

Equipe

Cal Poly, Team 18-22, Garner Spring 2011 Membro de Cal Poly, Team 18-22, Garner Spring 2011

CPSU-GARNER-S11S18G22

4 Membros

15 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 1

Todo: 2,012