Introdução

This guide will demonstrate removing the computer's CD/DVD drive.

Peças

Não são necessárias peças.

  1. Place the case on its side.
    • Place the case on its side.

    • Locate and remove the two 13.1 mm thumbscrews.

  2. Slide the side panel towards the back and remove.
    • Slide the side panel towards the back and remove.

  3. Locate the CD/DVD drive in the upper-front corner of the case.
    • Locate the CD/DVD drive in the upper-front corner of the case.

  4. Free shipping on all orders over US$100 or containing a Pro Tech Toolkit!

    Visite Nossa Loja
  5. Locate and remove the two cables attached to the CD/DVD drive.
    • Locate and remove the two cables attached to the CD/DVD drive.

  6. Locate and remove the two Phillips #0 7.8 mm screws.
    • Locate and remove the two Phillips #0 7.8 mm screws.

  7. Locate the three plastic tabs connecting the computer's faceplate to the case.
    • Locate the three plastic tabs connecting the computer's faceplate to the case.

    • Gently lift the three tabs to pull off the faceplate.

  8. Pull the faceplate forward and out.
    • Pull the faceplate forward and out.

  9. Completely remove the faceplate.
    • Completely remove the faceplate.

    • Remove the CD/DVD drive by pulling it forward towards the front.

Conclusão

To reassemble your device, follow these instructions in reverse order.

14 outras pessoas concluíram este guia.

Doug Howe

Member since: 23-10-2011

1.597 reputação

2 Guides authored

Equipe

Cal Poly, Team 6-8, Regan Fall 2011 Membro de Cal Poly, Team 6-8, Regan Fall 2011

CPSU-REGAN-F11S6G8

4 Membros

16 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 2

Últimos 7 dias: 26

Últimos 30 dias: 63

Todo: 14,283