Pular para o conteúdo principal

Peças

Nenhum componente especificado.

  1. Flip the laptop on it's back, so that the bottom is facing up.
    • Flip the laptop on it's back, so that the bottom is facing up.

  2. Loosen the single Phillips #1 screw.
    • Loosen the single Phillips #1 screw.

    • This screw is attached to the panel and cannot be removed.

  3. Push the highlighted pin outward until the RAM pops slightly out of its socket. Place the new chip in at a slight angle, and push it in and downward until little or none of the gold contacts are visible. Not seating the new DIMMs correctly could cause the device to refuse to POST.
    • Push the highlighted pin outward until the RAM pops slightly out of its socket.

    • Place the new chip in at a slight angle, and push it in and downward until little or none of the gold contacts are visible.

    • Not seating the new DIMMs correctly could cause the device to refuse to POST.

Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas concluíram este guia.

May Chauvin

Membro desde: 14-04-2011

201 reputação

6 Guias de autoria

Equipe

Cal Poly, Team 12-34, Maness Spring 2011 Membro de Cal Poly, Team 12-34, Maness Spring 2011

CPSU-MANESS-S11S12G34

4 Membros

6 Guias de autoria

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 1

Últimos 30 dias: 9

Todo: 3,852