Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Introdução

You would need to be removing the keyboard to access the heatsink and fan. If you need to, add a new layer of Arctic Silver Thermal Paste.

Peças

Nenhum componente especificado.

  1. Remove battery
    • Remove battery

    • Open screen so that it lies flat.

  2. Starting from the right side of the hinge cover,  use the flat end of the spudger to pry up the hinge cover and gently remove it. Starting from the right side of the hinge cover,  use the flat end of the spudger to pry up the hinge cover and gently remove it.
    • Starting from the right side of the hinge cover, use the flat end of the spudger to pry up the hinge cover and gently remove it.

  3. Using a Phillips screwdriver remove the four M2 x 3-mm screws holding in the keyboard. Using a Phillips screwdriver remove the four M2 x 3-mm screws holding in the keyboard.
    • Using a Phillips screwdriver remove the four M2 x 3-mm screws holding in the keyboard.

  4. Lift keyboard and detach the interface connector.
    • Lift keyboard and detach the interface connector.

    • Take extra care when removing and handling the keyboard. The key caps on the keyboard are fragile and easily come off.

  5. SKIP THE UPGRADE

    Save by fixing with an all-in-one kit.

    Shop iPhone Fix Kits

    SKIP THE UPGRADE

    Save by fixing with an all-in-one kit.

    Shop iPhone Fix Kits
  6. Detach screen connector Detach screen connector
    • Detach screen connector

  7. Remove two screws (5.8mm) located behind the screen. Remove two screws (5.8mm) located behind the screen.
    • Remove two screws (5.8mm) located behind the screen.

  8. Remove one screw (8.6 mm) on metal plating. Remove the metal plating
    • Remove one screw (8.6 mm) on metal plating.

    • Remove the metal plating

  9. Loosen four screws. These screws are attached to the heat sink and cannot be completely removed.
    • Loosen four screws.

    • These screws are attached to the heat sink and cannot be completely removed.

  10. Disconnect the wire connecting the heatsink to the motherboard. Disconnect the wire connecting the heatsink to the motherboard.
    • Disconnect the wire connecting the heatsink to the motherboard.

  11. Slide the heatsink away from the screen and lift.
    • Slide the heatsink away from the screen and lift.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

May Chauvin

Membro desde: 14/04/2011

201 Reputação

6 Guias de autoria

Equipe

Cal Poly, Team 12-34, Maness Spring 2011 Membro de Cal Poly, Team 12-34, Maness Spring 2011

CPSU-MANESS-S11S12G34

4 Membros

6 Guias de autoria

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 3

Últimos 30 dias: 13

Duração total: 3,279