Esta versão pode conter edições incorretas. Mude para o último instantâneo verificado.
O que você precisa
-
Este passo não foi traduzido. Ajude a traduzi-lo
-
Use a Phillips #1 screwdriver to remove the two 2.5x8mm screws on the back panel.
-
-
-
Este passo não foi traduzido. Ajude a traduzi-lo
-
Place the plastic spudger in the slot. Using the flat side of the spudger pry the back panel upward and off.
-
Cancelar: não concluí este guia.
2 outras pessoas executaram este guia.