Pular para o conteúdo principal

Introdução

Before removing the back panel, make sure the device is disconnected from any power source. Make sure that your battery has also been removed.

  1. Use a Phillips #1 screwdriver to remove the two 2.5x8mm screws on the back panel. Use a Phillips #1 screwdriver to remove the two 2.5x8mm screws on the back panel.
    • Use a Phillips #1 screwdriver to remove the two 2.5x8mm screws on the back panel.

  2. kits de reparo de baterias de iPhone

    Only $29.99

    Buy Now

    kits de reparo de baterias de iPhone

    Only $29.99

    Buy Now
  3. Place the plastic spudger in the slot. Using the flat side of the spudger pry the back panel upward and off. Do not be afraid to use a bit of muscle, as the panel does not come off without some force.
    • Place the plastic spudger in the slot. Using the flat side of the spudger pry the back panel upward and off.

    • Do not be afraid to use a bit of muscle, as the panel does not come off without some force.

Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas concluíram este guia.

Kyla Ward

Membro desde: 19-03-2018

495 reputação

4 Guias de autoria

Equipe

Baylor, Team S5-G5, Williams Spring 2018 Membro de Baylor, Team S5-G5, Williams Spring 2018

BU-WILLIAMS-S18S5G5

3 Membros

5 Guias de autoria

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 3

Últimos 7 dias: 17

Últimos 30 dias: 43

Todo: 430