Introdução

In this guide, we will show you how to remove and replace the Display Assembly.

Peças

Não são necessárias peças.

  1. WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.
    • WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.

    • Peel off the pieces of tape that secure the display cable and touch-screen board-cable to the system board.

    Adicionar comentário

  2. Open the latches to disconnect the display cable and the touch-screen board-cable from the system board.
    • Open the latches to disconnect the display cable and the touch-screen board-cable from the system board.

    Adicionar comentário

    • Turn the computer over and open the display as far as possible.

    Adicionar comentário

    • CAUTION: Place the computer on a soft and clean surface to avoid scratching the display.

    • Place the computer face down on a flat surface.

    Adicionar comentário

    • Remove the screws that secure the display assembly to the palm-rest assembly.

    Adicionar comentário

    • Lift the display assembly off the palm-rest assembly.

    Adicionar comentário

    • Place the NEW display assembly face down on the palm-rest assembly.

    Adicionar comentário

    • Align the screw holes on the display hinges with the screw holes on the palm-rest assembly.

    Adicionar comentário

    • Close the display and turn the computer over.

    Adicionar comentário

    • Slide the display cable and the touch-screen board-cable into their respective connectors on the system board and close the latches to secure the cables.

    Adicionar comentário

    • Adhere the pieces of tape that secure the display cable and the touch-screen board-cable to their respective connectors on the system board.

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Terrence15

Member since: 18-12-2017

69.919 reputação

442 Guides authored

Equipe

Informative Technologies Inc. Membro de Informative Technologies Inc.

Community

15 Membros

925 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 2

Últimos 7 dias: 10

Últimos 30 dias: 51

Todo: 288