Ir para o conteúdo principal

DeWalt DW936 Boot Replacement

O que você precisa

  1. DeWalt DW936 Boot Replacement, Plastic Cover: passo 1, imagem 1 %32
    • Use a T-20 hexhead screw to unscrew 4 hexagonal screws surrounding the base of the black air filter. The screws are on the yellow portion.

  2. DeWalt DW936 Boot Replacement: passo 2, imagem 1 %32
    • Use a T-15 hexhead screw to unscrew 5 hexagonal screws. These screws are located on the opposite side of the saw from previous step.

  3. DeWalt DW936 Boot Replacement: passo 3, imagem 1 %32
    • Remove Allen Key.

  4. DeWalt DW936 Boot Replacement: passo 4, imagem 1 %32
    • Unscrew the black plastic knob underneath the trigger.

  5. DeWalt DW936 Boot Replacement: passo 5, imagem 1 %32
    • Grab hold of the black air filter portion and pull off.

  6. DeWalt DW936 Boot Replacement: passo 6, imagem 1 %32
    • This is what the inside of the saw looks like.

  7. DeWalt DW936 Boot Replacement, Boot: passo 7, imagem 1 %32
    • Use a T-15 hex head screw to unscrew the four screws located around the outside of the motor.

  8. DeWalt DW936 Boot Replacement: passo 8, imagem 1 %32
    • Using an H 4.0 hex head screw, unscrew the bolt located right above the boot that is next to the motor of the saw.

  9. DeWalt DW936 Boot Replacement: passo 9, imagem 1 %32
    • Pull the blade away from the body of the saw causing the blade and boot to detach.

  10. DeWalt DW936 Boot Replacement: passo 10, imagem 1 %32
    • Pull the boot downwards away from the blade to detach it.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Scott Weinhardt

Membro desde: 01/25/17

603 Reputação

Autoria de 5 guias

Equipe

Cal Poly, Team 8-2, Banghart Winter 2017 Membro de Cal Poly, Team 8-2, Banghart Winter 2017

CPSU-BANGHART-W17S8G2

Membros da 3

Autoria de 5 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 2

Últimos 7 dias: 3

Últimos 30 dias: 13

Duração total: 480