Introdução
This guide will show you how to replace the black air filter cap located on the top of the motor.
O que você precisa
-
-
Using a T-20 hex head screw, unscrew the two screws located at the top and bottom of the black air filter. The screws are directly above and below the yellow lettering.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancelar: não concluí este guia.
Uma outra pessoa concluiu este guia.
Equipe
Cal Poly, Team 8-2, Banghart Winter 2017 Membro de Cal Poly, Team 8-2, Banghart Winter 2017
CPSU-BANGHART-W17S8G2
Membros da 3
Autoria de 5 guias
