Ir para o conteúdo principal

DeWalt DW235G Drill Power Cord Replacement

O que você precisa

  1. DeWalt DW235G Drill Power Cord Replacement, Handle Cover: passo 1, imagem 1 %32
    • Remove the three screws with a Tr20 hex bit screwdriver.

    • Remove the back cover.

  2. DeWalt DW235G Drill Power Cord Replacement, Power Cord: passo 2, imagem 1 %32
    • Unscrew the Tr20 Hex Screw connecting the green wire to the power cord.

    • Ensure the power drill is unplugged before disconnecting wires.

  3. DeWalt DW235G Drill Power Cord Replacement: passo 3, imagem 1 %32 DeWalt DW235G Drill Power Cord Replacement: passo 3, imagem 2 %32
    • Disconnect all the wires connected from the trigger box and power cord to the drill motor by pulling on the connectors.

    • There will be 5 wires to disconnect: 2 black, a white, a red, and a blue wire. Remember the locations of where they were connected so you can reconnect them later.

  4. DeWalt DW235G Drill Power Cord Replacement: passo 4, imagem 1 %32
    • Remove the trigger box and power cord from the main chassis.

  5. DeWalt DW235G Drill Power Cord Replacement: passo 5, imagem 1 %32
    • Disconnect the wires connecting the power cord to the trigger box by pressing on the clips with a spudger tool.

    • There will be 3 wires to disconnect: A black, white, and green wire. Remember what color attaches to each connector on the trigger box.

    • For reassembly, insert the wires back into the trigger box until a click is heard.

Conclusão

The power cord will now be disconnect and you can replace it with a new one.

To reassemble your device, follow these instructions in reverse order.

3 outras pessoas executaram este guia.

rpittana

Membro desde: 09/12/23

248 Reputação

Autoria de 2 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 11

Últimos 30 dias: 78

Duração total: 282