Ir para o conteúdo principal

DeWALT Hammer Drill DW511 Chuck Replacement

O que você precisa

  1. DeWALT Hammer Drill DW511 Chuck Replacement, Lever Assembly: passo 1, imagem 1 %32 DeWALT Hammer Drill DW511 Chuck Replacement, Lever Assembly: passo 1, imagem 2 %32 DeWALT Hammer Drill DW511 Chuck Replacement, Lever Assembly: passo 1, imagem 3 %32
    • Remove two 45 mm T20 Torx screws.

    • Remove one 30 mm T20 Torx screw.

  2. DeWALT Hammer Drill DW511 Chuck Replacement: passo 2, imagem 1 %32
    • Pull off the top case and set it aside.

  3. DeWALT Hammer Drill DW511 Chuck Replacement: passo 3, imagem 1 %32 DeWALT Hammer Drill DW511 Chuck Replacement: passo 3, imagem 2 %32 DeWALT Hammer Drill DW511 Chuck Replacement: passo 3, imagem 3 %32
    • Grab the gear case cover and gently pull it out just enough to where it exposes the lever assembly.

    • It is important that the brushes are removed before you do this step or you may damage your brushes.

    • The lever assembly can now be lifted out.

  4. DeWALT Hammer Drill DW511 Chuck Replacement: passo 4, imagem 1 %32
    • With the old lever assembly removed you can now replace it with a new one.

  5. DeWALT Hammer Drill DW511 Chuck Replacement, Chuck: passo 5, imagem 1 %32 DeWALT Hammer Drill DW511 Chuck Replacement, Chuck: passo 5, imagem 2 %32 DeWALT Hammer Drill DW511 Chuck Replacement, Chuck: passo 5, imagem 3 %32
    • Gently separate the chuck and plastic housing from the hammer drill body.

    • The removal of the screw from the chuck to separate the plastic housing requires hand strength and specialized tools.

    • The plastic housing is prone to damage if excessive force is applied during the replacement.

Conclusão

To reassemble your device, follow these instructions in reverse order.

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 10

Duração total: 598