Introdução

Taking out the fan is quick and easy. When removing the fan it is okay to use some force as it's not delicate.

Peças

Não são necessárias peças.

  1. Flip the device and lay flat.
    • Flip the device and lay flat.

    Adicionar comentário

  2. Remove the four (9 mm) screws with a PH2 screwdriver.
    • Remove the four (9 mm) screws with a PH2 screwdriver.

    • Remove the two (7 mm) located with a PH2 screwdriver.

    Adicionar comentário

    • Flip the device over and pry the top off with a plastic opening tool.

    Adicionar comentário

    • Remove the ribbon cable connecting the motherboard to the button control board by gently pulling it from its connector.

    Adicionar comentário

    • Remove four (6 mm) screws connecting the motherboard using a J0 screwdriver.

    Adicionar comentário

    • Remove the two cables connected to the motherboard: black power cable and the red/black fan cable.

    • the black cable requires more force to remove than the other cables.

    Adicionar comentário

    • Lift the black latch on the ZIF connector and remove the ribbon cable that attaches the digitizer to the motherboard.

    Adicionar comentário

    • Raise motherboard by lifting sideways and then up to avoid the ports.

    Adicionar comentário

    • Remove wires attaching the piezoelectric speakers to the motherboard.

    Adicionar comentário

    • Remove the five screws securing the black plastic cover with a J0 screwdriver.

    • Lift up and out to remove.

    Adicionar comentário

    • Pull the fan up and out of the housing.

    • In this image the lamp and power input have been removed to increase visibility, you do not have to remove these to remove the fan.

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas concluíram este guia.

Sebastian Alvarez de Araya

Member since: 15-02-2018

130 reputação

Autoria de 1 guia

Equipe

USF Tampa, Team S16-G2, Boczar Spring 2018 Membro de USF Tampa, Team S16-G2, Boczar Spring 2018

USFT-BOCZAR-S18S16G2

5 Membros

5 Guides authored

Any idea of the specifications of the fan? 12v, 24v? I want to change it for another more quiet… but not sure about its voltage. It is 50x50x20mm right? Thanks!

Agustín Castiñeira Fernández - Responder

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 7

Últimos 30 dias: 40

Todo: 277