Introdução

The top cover of the RD-810 protects the internal components. It must be removed to conduct any repairs.

Ferramentas

Peças

Não são necessárias peças.

Make sure the projector is unplugged before starting Place the projector upside down to access the screws on the bottom.
  • Make sure the projector is unplugged before starting

  • Place the projector upside down to access the screws on the bottom.

  • Remove the five 7mm long screws using a #3 Phillips screwdriver at least 2 inches long.

Adicionar comentário

Flip the projector over and then remove the cover by lifting it up.
  • Flip the projector over and then remove the cover by lifting it up.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

John Russell

Member since: 14-02-2018

747 reputação

9 Guides authored

Equipe

USF Tampa, Team S5-G3, Eyestone Spring 2018 Membro de USF Tampa, Team S5-G3, Eyestone Spring 2018

USFT-EYESTONE-S18S5G3

3 Membros

9 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 2

Últimos 30 dias: 5

Todo: 29