Peças

Não são necessárias peças.

  1. Remove the two 9.65 mm screws on the back cover using the Philips head PH00 screw driver.
    • Remove the two 9.65 mm screws on the back cover using the Philips head PH00 screw driver.

  2. Remove the back casing to expose the circuit board.
    • Remove the back casing to expose the circuit board.

  3. Detach the gray antenna wires by gently pulling on the side closest to the circuit board.
    • Detach the gray antenna wires by gently pulling on the side closest to the circuit board.

  4. Free shipping on all orders over US$100,00 or containing a Pro Tech Toolkit!

    Visite Nossa Loja
  5. Detach the speaker wire by gently pulling on the side closest to the body of the camera.
    • Detach the speaker wire by gently pulling on the side closest to the body of the camera.

  6. Remove the two 7.25 mm screws  using the Ph00  head.
    • Remove the two 7.25 mm screws using the Ph00 head.

  7. Remove the back grey speaker plate
    • Remove the back grey speaker plate

  8. Remove the speaker by gently pulling on the wire near the speaker.
    • Remove the speaker by gently pulling on the wire near the speaker.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Collyn Dodge

Member since: 21-03-2018

305 reputação

2 Guides authored

Equipe

IUPUI, Team S4-G2, Baechle Spring 2018 Membro de IUPUI, Team S4-G2, Baechle Spring 2018

IUPUI-BAECHLE-S18S4G2

3 Membros

3 Guides authored

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 2

Todo: 63