Ir para o conteúdo principal

CyberPowerPC RGB 7 Color LED Backlight Replacement

O que você precisa

  1. CyberPowerPC RGB 7 Color LED Backlight Replacement, Plastic Casing: passo 1, imagem 1 %32 CyberPowerPC RGB 7 Color LED Backlight Replacement, Plastic Casing: passo 1, imagem 2 %32
    • Be sure to unplug the keyboard before starting the disassembly.

    • Remove the two 10 mm length screws using the Phillips head #1 which are located underneath the kickstand of the keyboard and directly next to it.

  2. CyberPowerPC RGB 7 Color LED Backlight Replacement: passo 2, imagem 1 %32 CyberPowerPC RGB 7 Color LED Backlight Replacement: passo 2, imagem 2 %32
    • Remove the sixteen 5 mm length screws using the Phillips head #2.

    • One of the screws may be located underneath a manufacturer's sticker.

  3. CyberPowerPC RGB 7 Color LED Backlight Replacement: passo 3, imagem 1 %32
    • Lift up and remove the plastic casing.

  4. CyberPowerPC RGB 7 Color LED Backlight Replacement, LED Backlight: passo 4, imagem 1 %32
    • Remove the metal backing located directly underneath the white plastic casing.

  5. CyberPowerPC RGB 7 Color LED Backlight Replacement: passo 5, imagem 1 %32
    • Be careful not to pull too hard on the ribbon cable, as it may break.

    • Disconnect the ribbon cable that connects the LED board to the motherboard.

  6. CyberPowerPC RGB 7 Color LED Backlight Replacement: passo 6, imagem 1 %32
    • Carefully remove the LED board, which should now come free from the casing.

Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas executaram este guia.

Braydon Lantz

Membro desde: 02/12/18

229 Reputação

Autoria de 2 guias

Equipe

USF Tampa, Team S15-G2, Boczar Spring 2018 Membro de USF Tampa, Team S15-G2, Boczar Spring 2018

USFT-BOCZAR-S18S15G2

Membros da 4

Autoria de 10 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 6

Últimos 30 dias: 25

Duração total: 874